014-1059-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Vet oplossingen Maximale werk "druk" 500 bar

Maximale werk "druk" 500 bar

dispensers and manual pumps where a major quantity of grease with slow pressure and short distance is required

avoiding grease flow interruptions by air pockets in the grease bed

5 bar and a maximum of 8 bar

een volgplaat met doorsnede van 370 mm en een vul pistool

014-1059-030 - Follower plate for pumps with shank 30 mm subgroup-Accessoires en losse onderdelen-Vet oplossingen Maximale werk "druk" 500 barIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.