014-1059-030 - Follower plate for pumps with shank 30 mm subgroup-gesloten-slanghaspel Indien gewenst kan er een

Indien gewenst kan er een trolley bijgeleverd worden zodat u de installatie probleemloos door de werkplaats kunt rollen

To have the tyre inflator ready for use you can only put on the automatic charging mounted on the line of the compressed air

avoiding the dispersion in the environment

for the inspection and the re-establishment of tyre pressure through the inflating and deflating valve lever

roestvrijstalen bevestigingsplaat voor op een 220 liter vat

014-1059-030 - Follower plate for pumps with shank 30 mm subgroup-gesloten-slanghaspel Indien gewenst kan er eenIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.